Inno Sense Olivenkopf Unterlegtrense Mullen Soft
SKU: 83959652651

Inno Sense Olivenkopf Unterlegtrense Mullen Soft

Sale price$107.95 Regular price$119.95
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 9 - Jul 14

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Inno Sense Olivenkopf Unterlegtrense Mullen SoftInno Sense fr junge oder sensible Pferde Gebisse der Inno Sense Linie knnen fr die meisten Pferde eingesetzt werden und eignen sich besonders fr junge Pferde und oder Pferde mit einem empfindlichen Maul. Der eingesetzte Kunststoff wurde von der FDA (US Food and Drug Administration) fr unbedenklich erklrt, d. h. dass das Material keine Weichmacher enthlt und weder fr Mensch noch Tier schdlich ist. Durch den Einsatz eines Inno Sense Gebisses kommt es zu

Inno Sense - für junge oder sensible Pferde

Gebisse der Inno Sense Linie können für die meisten Pferde eingesetzt werden und eignen sich besonders für junge Pferde und/ oder Pferde mit einem empfindlichen Maul. Der eingesetzte Kunststoff wurde von der FDA (US Food and Drug Administration) für unbedenklich erklärt, d.h. dass das Material keine Weichmacher enthält und weder für Mensch noch Tier schädlich ist. Durch den Einsatz eines Inno Sense Gebisses kommt es zu einer vertrauensvolleren und geschmeidigeren Anlehnung zwischen Pferdemaul und Reiterhand. Inno Sense Mundstücke sind im Gegensatz zu Mundstücken aus Metall deutlich weicher. Das lieben die meisten Pferde an diesen Gebissen. Jedoch sind Pferdezähne wesentlich härter als Kunststoff und können somit die Lebensdauer eines Inno Sense Mundstücks verkürzen. Wenn das Gebiss korrekt im zahnfreien Bereich platziert wird, ist eine Beschädigung des Mundstücks eher unwahrscheinlich, aber durch scharfkantige Zähne nicht ausgeschlossen. Solche Schäden werden nicht als Herstellungsfehler betrachtet.

Die Mullen Stange

Das Inno Sense Mullen ist eine gerade Stange, die sich leicht nach vorne biegt. Dieses Mundstück ist aus synthetischem Material gefertigt. Das Gebiss hat einen starren Kern, der das Mullen nicht flexibel macht, aber das Material darum herum verleiht dem Gebiss ein weiches Gefühl. Das verwendete synthetische Material ist ungiftig und von der FDA zugelassen.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 83959652651

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 2013 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Peter Schott
Belleville, US
★★★★★ 5
Use the best oil to protect your investment
Configuration: 4-Stroke, Size: 1 GA
Great product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2025
S
Verified Purchase
Steve M.
West Palm Beach, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
San Leandro, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Whiting, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Belleville, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024

recommand products