SKU: 73906421317

Sakae/Ringyo (SR) Apex / Super Custom 3P A-12 NOS Vintage 118 mm Bottom Bracket Axle

Sale price$35.10 Regular price$39.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Sakae/Ringyo (SR) Apex / Super Custom 3P A-12 NOS Vintage 118 mm Bottom Bracket AxleOriginal part in production from the 1970s to the 1980s New old stock! Still unused after all these years Suitable for historic cycling events such as L'Eroica Worldwide shipping Sakae Ringyo (SR) Apex Super Custom bottom bracket axle (or BB spindle if you prefer), hailing from Japan and in production from the 1970s to the 1980s (yet still new & unused after all this time). Made from steel and weighing in at 215 grams. A fine choice for keeping your

✓ Original part - in production from the 1970s to the 1980s
✓ New old stock! Still unused after all these years
✓ Suitable for historic cycling events such as L'Eroica
✓ Worldwide shipping

Sakae/Ringyo (SR) Apex / Super Custom bottom bracket axle (or BB spindle if you prefer), hailing from Japan and in production from the 1970s to the 1980s (yet still new & unused after all this time). Made from steel and weighing in at 215 grams. A fine choice for keeping your vintage bike authentic, but also great for any other compatible bike.

This axle is also compatible with other SR chainsets from the same era, including Aerox, CR, CX & Silstar.

If you're taking part in L'Eroica or any other vintage event, this is fully compliant - so rest assured, the pre-1987 police won't lock you up for having the wrong axle!

OVERVIEW


Race Condition - New Old Stock*
Production Era - 1970s & 1980s
Country - Japanese
Material - Steel
Weight - 215 g
Stock Code - D-G3-BB-AS19V

*New old stock items may have marks from storage over the years, and as we often have multiples they can vary from piece to piece, but they are always genuine new & unused items.

TECHNICAL INFO


Axle Type - Square Taper
Axle Markings - 3P A-12
Axle Length (D) - 118 mm
Axle Centre (B) - 52 mm
Axle Drive Side (C) - 35 mm
Axle Non-Drive Side (A) - 32 mm
Shell Width - 68 mm

NB: Check the help section to see how we take these measurements.

SHIPPING, TAXES & RETURNS

We've been safely sending orders around the world since 2010. There's a handy shipping calculator on the shopping cart page so you can see the cost of postage as soon as you've added it to your basket. Your order will be carefully packed and sent with tracking & insurance, we despatch most orders within 2-3 days but larger items and orders placed before the weekend can take an extra day or two to process.

We accept returns, please notify us within 14 days and ensure the item arrives back with us no later than 30 days after the order was received.

EU Customers – for orders under €150 (excluding shipping), VAT will be collected at checkout, but from 1st July 2026, due to new EU import regulations, there may also be a customs duty payable to the carrier. For orders over €150, all import fees will be payable to the carrier, with nothing collected at checkout.

USA Customers – import fees are now collected at checkout for all orders to the US, so there won’t be any surprise charges when your order arrives.

Other International Customers – local import fees may still apply, charged by your customs office or courier before delivery. These are not collected by us, so please check your local rates before purchasing.

Any applicable fees will appear at checkout.

SAFETY & COMPLIANCE
This product complies with the EU General Product Safety Regulation (GPSR). Professional installation and regular inspections are recommended. Due to the product's age, extra care should be taken during use.

EU Authorised Representative - Global Trade Department NI Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast BT9 6AG, Northern Ireland

HELP SECTION
We've provided reference below to illustrate how we take the measurements.

Axle Type - for square tapers, the ISO introduced a standard for European makers in the early 90s, JIS then did the same in Asia. Before then it was not so simple, and although there is a degree of interchangeability, the best way to make sure you have the right axle is to stick to the same brand from the same era, ideally the proprietary model.

Axle Length (D) - your crankset dictates the axle length you need and the recommendation should be used to avoid issues with chainline. If you're replacing an axle that works perfectly then this can be matched, otherwise you'll need to check the manufacturers spec, a good resource for older bikes is Velobase.

Centre (B) - measured from the outside of the 'shoulders' of the bearing races, as seen in the diagram.

Drive Side (C) - the right side (with any logos etc on the axle facing you), your right crank and chainrings will mount to this side.

Non-Drive Side (A) - the left side, where the left crank arm will be mounted.

Shell Width - the width of the bottom bracket shell the axle was designed to fit, measured at its widest point.



Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 73906421317

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 199 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Linda W.
Whiting, US
★★★★★ 5
Perfect for my company's temporary needs
Color: Gray, Size: 72" wide, 66" Tall
My company ordered multiples of these dividers to separate desks in much smaller temporary space we had to use after our offices were flooded in August 2023. (Yeah, I know - just getting around to reviewing them now!) These fit the bill perfectly. Granted a bit of privacy so we weren't staring at the employee next to us. Easy to put together; excellent value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 25, 2025
B
Verified Purchase
Bree
Massapequa, US
★★★★★ 5
Privacy
Color: Gray, Size: 72" wide, 66" Tall
Sturdy. Is a good divider
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
L
Verified Purchase
Larry Emanuel
Charlottesville, US
★★★★★ 4
Okay for privacy, not a sound wall
Color: Gray, Size: 72" wide, 66" Tall
Ordered this for a home office, it is easy to put the panels together, one man job. They look nice, stand up well, and gave privacy and seperation. You can tack a white board to them. These panels have absolutely no sound reducing properties that I can ascertain, so if you are ordering them as 'accoustic" type panels you will probably be disappointed. For making a cubicle they perform well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2021
C
Verified Purchase
Camila
West Palm Beach, US
★★★★★ 5
Noise control
Color: Dark Gray, Size: 72" wide, 66" Tall
Great for office spaces that are close together. Easy to install and easy to move. Very well made. Great value. Easy to move around.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
J
Verified Purchase
Jennifer Perez-Batista
Draper, US
★★★★★ 1
I DO NOT RECOMMEND
Color: Dark Gray, Size: 72" wide, 66" Tall
I got this primarily for the acoustic wall feature but it does not block any sound whatsoever. It's just a mobile, overpriced wall. The only privacy it provides it blocking you from view but the same could be done with some cardboard for a fraction of the price. Not only is it not as described but they are requiring that I pay not only to ship it back for return but is also requiring that I pay for the shipping label. So I will be paying around $150 to get my $400 refund. Unacceptable. DO NOT BUY
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 14, 2025

recommand products